退化发动机加速性能恢复控制方法

针对退化发动机加速性能下降的现象,提出一种变喘振裕度约束的模型预测控制方法。通过分析退化发动机在加速过程中的工作特点,将加速过程分为三个阶段,在不同阶段采取不同的喘振裕度约束。鉴于模型预测控制能够显式处理约束、采用在线滚动优化来获取最优控制输入,采取模型预测控制方法,并采用具有较高实时性的交替方向乘子法求解优化问题,实现了退化发动机加速性能的恢复。数字仿真结果表明,采用本文所提出的加速性能恢复控制方法后,相比退化发动机,加速过程中所耗费的时间缩短了35%以上。     

基于GARCH族优选模型的舰船器材消耗预测

器材消耗量预测是做好技术保障工作的前提和基础,受设备生命周期、任务类型、海洋环境及使用设备人员的技能水平等因素的影响,舰船器材消耗量序列会随着时间的推移而产生波动现象,丛集效应和高峰厚尾特征明显。根据 AIC(A-Information Criterion)准则,对 GARCH(Generalized Autoregressive Conditional Heteroscedasticity)族模型进行比较优选,寻求一种更为合适的预测模型,实现对消耗量的准确预测。     

小样本条件下多应力加速寿命试验预测方法

鉴于导弹中的电子设备价格昂贵、可用于试验的样本量少,在开展加速试验以及寿命预测的实际工作中通常为小样本的背景。文章研究探索小样本条件下多应力加速试验寿命预测方法,分别建立通用对数线性模型、 BAS-BP神经网络模型、灰色–支持向量回归模型,结合多应力加速试验数据在各应力条件下的样本容量分别为 56组、20组、10组、5组的情况下,比较 3种模型的预测效果,分析各模型的适用场合和时机,探索小样本条件下模型的选优问题,为小样本条件下多应力加速试验寿命预测提供有益的借鉴。     

Stationary flow fields prediction of variable physical domain based on proper orthogonal decomposition and kriging surrogate model

In this paper a new flow field prediction method which is independent of the governing equations, is developed to predict stationary flow fields of variable physical domain. Predicted flow fields come from linear superposition of selected basis modes generated by proper orthogonal decomposition(POD). Instead of traditional projection methods, kriging surrogate model is used to calculate the superposition coefficients through building approximate function relationships between profile geometry parameters of physical domain and these coefficients. In this context,the problem which troubles the traditional POD-projection method due to viscosity and compressibility has been avoided in the whole process. Moreover, there are no constraints for the inner product form, so two forms of simple ones are applied to improving computational efficiency and cope with variable physical domain problem. An iterative algorithm is developed to determine how many basis modes ranking front should be used in the prediction. Testing results prove the feasibility of this new method for subsonic flow field, but also prove that it is not proper for transonic flow field because of the poor predicted shock waves.     

LIPS-200离子推力器放电室原初电子动力学行为的数值模拟研究

为了得到试验测量不到的气体放电过程中电磁场作用下单个原初电子的动力学行为,建立了LIPS-200离子推力器放电室二维仿真模型,应用网格粒子法(PIC)和蒙特卡洛碰撞(MCC)模拟法对其进行了研究。模拟得到在额定工况下原初电子和中性原子之间的碰撞概率、原初电子损耗率、电磁场分布对其运动速度及运动轨迹的影响等。结果表明磁铁表面磁感强度最大,越靠近放电室内部磁感强度越小,对称轴区域无磁场分布,原初电子在电磁场作用下沿磁力线作加速螺旋运动;运动等离子体的自洽电势大小范围仅为0~2.0V,几乎不会影响等离子体运动;对应总原初电子个数为1.2×106时直接被阳极表面吸收的损耗率仅为0.02%。     

风扇进口噪声预测模型的改进

针对Heidmann模型对风扇进口低频噪声(1k Hz)预测结果偏低的情况,通过引入风扇叶尖弦长雷诺数和相关几何参数改进了Heidmann模型中风扇进口宽频噪声的频谱修正函数,确定了其中频谱修正系数为0.085。对比改进模型和Heidmann模型的风扇进口噪声预测结果发现:在亚声速工况下,改进的模型很好地改善了风扇进口低频噪声的预测结果,改进幅值可以达到约45d B;而在超声速工况下,由于风扇进口产生的组合单音噪声成为风扇进口噪声的主要组成部分,除了在小于100Hz的频域内,改进的模型与Heidmann模型的预测结果差别不大。     

乙醇-空气稀液雾值班火焰的大涡模拟研究

为加深对气液两相湍流燃烧现象的认知,检测火焰面模型在液雾燃烧中的适用性,本文在欧拉-拉格朗日架构下使用火焰面/反应进度变量模型(FPV)数值模拟了乙醇-空气稀液雾值班火焰。欧拉坐标系下的气相湍流场使用大涡模拟方法模拟,离散液相则使用拉格朗日颗粒轨道模型进行描述,考虑了相间质量、动量、能量交换。燃烧模型中采用碳元素定义混合物分数,在混合物分数方程源项中体现液相对燃烧模型的影响。模拟得到的气相温度分布和液相统计值均和实验数据较好吻合,验证了该燃烧模型对稀液雾扩散类型火焰的适用性。分析瞬时图发现,该稀液雾火焰的最高燃烧温度往往位于当量混合物分数附近,在出口下游20倍直径处火焰完全点着,此处上游FPV模型能给出局部点火熄火现象。蒸发作用在剪切层和点火区域较强,而液滴和火焰作用较弱,单一液滴很少被火焰包围。     

Practical compensation for nonlinear dynamic thrust measurement system

The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system,the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network(RBF-NN), where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square(LMS) algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine’s performance and the tolerance error0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.     

基于环控物理仿真平台的余度模型设计

在环控物理仿真平台上,基于MATLAB和Vxworks环境,建立了飞机环控系统余度模型。详细论述了环控系统故障模型、机电管理计算机模型。此外,对模型的有效性、可靠性进行了验证。通过试验验证,表明模型结构正确、能够满足环控系统余度功能要求。     

三维数模随动下的机翼结构重量优化

目前,基于快速建模下的重量重心估算系统得到了快速发展。为了进一步提高结构重量估算精度,研究了如何在重量重心快速分析(WCGA)系统环境中构建优化模块。以机翼结构重量优化为例,提出优化流程,对优化模块功能进行分解,给出模型简化要求。以A320飞机机翼为例,对梁和长桁进行优化,结果显示,经过优化,有效减轻了结构重量,且相比于传统的减重优化设计方法,极大提高了计算效率。